Intel AX965Q User Manual page 63

2.2.2.10 Boot Up NumLock Status
Sets the boot up Num Lock status. The options are "On" and "Off".
Item
On Enable NumLock
Off Disable NumLock
2.2.2.11 Gate A20 Option
Item
Normal A pin in the keyboard controller controls GateA20
Fast Lets chipset control GateA20
2.2.2.12 Typematic Rate Setting
The typematic rate is the rate key strokes repeat as determined by the keyboard controller.
The commands are "Enabled" or "Disabled". Enabling allows the typematic rate and delay
to be selected.
2.2.2.13 Typematic Rate (Chars/Sec)
The BIOS accepts the following input values (characters/second) for typematic rate: 6, 8,
10, 12, 15, 20, 24, and 30.
2.2.2.14 Typematic Rate (Msec)
Typematic delay is the time interval between the appearances of two consecutive
characters, when the key is continuously depressed. The input values for this category are:
250, 500, 750, and 1000 (ms).
2.2.2.15 Security Option
This category determines whether the password is required when the sys- tem boots up or
only when entering setup. The options are:
Item
The system will not boot and access to Setup will be denied if the
System
correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct
Setup
password is not entered at the prompt.
To disable security, select PASSWORD SETTING at Main Menu and
then you will be asked to enter password. Do not type anything and
just press <Enter>, it will disable security. Once the security is
disabled, the system will boot and you can enter Setup freely.
Description
Description
(Default)
Description
User's Manual
ATX Main board 63