Table of Contents
Advertisement
ATX Main board
1.5.3
Installing a DIMM
1.
Unlock a DIMM socket by pressing the
retaining clips outward
2.
Align a DIMM on the socket such that the
notch on the DIMM matches the break on
the socket.
3.
Firmly insert the DIMM into the socket until
the retaining clips snap back in place and
the DIMM is properly seated.
30
Make sure to unplug the power supply before adding or removing
DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
A DDR2 DIMM is keyed with a notch so that it fits in only one
direction. DO NOT force a DIMM into a socket to avoid damaging
the DIMM.
The DDR2 DIMM sockets do not support DDR DIMMs. DO NOT
install DDR DIMMs to the DDR2 DIMM socket.
Advertisement
Table of Contents
