Enjoying Music Or Videos In The Remote Zone; Controlling The Dtr-9.1 From The Remote Zone; Controlling The Dtr-9.1 Without The Remote Controller - Integra DTR-9.1 Instruction Manual

Integra av receiver instruction manual
Table of Contents

Advertisement

Enjoying music or videos in the remote
zone
Standby/On
Standby
Zone
2
(
GRN
)
Rec
(
RED
)
Display
DVD
Video
1
Power
On
Off
Zone 2

Controlling the DTR-9.1 from the remote zone

1. Aiming at the remote sensor, press the POWER
ON button on the remote controller.
Note:
Be aware that if you start using the system in the remote
zone (Zone 2) while a recording is going on in the main
zone, the recording is aborted.
2. Press the appropriate input selector button on
the remote controller to select the desired
source.
3. Adjust the volume on the power amplifier to
the desired level.
Controlling the DTR-9.1 without the remote
controller
1. Press the Zone 2 button on the DTR-9.1.
2. Select a source.
After pressing the Zone 2 button, you must press an
input source button within 8 seconds. To select the
same source as that selected for the main zone,
press the Zone 2 button twice in succession. The indi-
cator above the selected input source will light
green. Adjust the volume in the remote zone as de-
sired.
Ex.: When the Zone 2 button is pressed twice
Ex.: When the Zone 2 button and then VIDEO 4 button are
pressed
Video
2
Video
3
Video
4
Video
5
Tape
1
Tape
2
AM
FM
CLEAR
Off
POWER
Master Volume
Phono
C D
Open/Close
Phones
DTR-9.1
Notes:
• If the Zone 2 button was pressed twice so that the
same source is being played in the main and re-
mote zones, then changing the input source in the
main zone also changes the input source for the re-
mote zone.
• In the remote zone, you can only play the source in
the 2-channel mode. You cannot play the source in
the remote zone in the surround mode.
• If the Rec Out button is pressed in the main room
while someone is using the system in the remote
zone, the Zone 2 function will be deactivated and
the source will turn off in the remote zone.
• The Zone 2 terminal is an analog output. Digital sig-
nals are not output. If no sound is heard from the
selected input source, check if the component is
connected to the analog inputs.
• Please note that some third-party multi-room system
components may not be fully compatible with the
Integra multi-room system components.
• If you are not using the system in the remote zone,
always press the Zone 2 button and then the Off but-
ton to turn the Zone 2 function off.
ON
VOL
AUDIO
MUTING
TRACK
DISC
REC
OPEN/COLSE
DVD
CD
Input
T1
T2
TUN
PH
selector
V1
V2
V3
V –
STEREO
DIRECT
DSP
buttons
1
2
3
SURROUND
THX
DSP
4
5
6
LEVEL +
Re-EQ
CH SEL
7
8
9
LEVEL –
LATE NIGHT
DIMMER
+ 10
0
ENT
HOME THEATER CONTROLLER
RC-418M
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents