Controls Menu - InFocus LPTM425z User Manual

U s i n g t
NOTE: If you already know the
video standard used in your
geographical area, it's often best to
manually select it.
NOTE: To order the LP425
Ceiling Mount, refer to "Optional
Accessories" on page 48.
30
h e P r o

Controls Menu

F 21
IGURE
Controls menu
Video Standard
When Video standard is set to Auto, the projector attempts to
pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N,
or SECAM) automatically based on the input signal it receives.
(The video standard options may vary depending on your region
of the world.) The input signals for SECAM, PAL-M, and PAL-N
video cannot be automatically detected, therefore they must be
chosen manually. If the projector is unable to detect the correct
standard, the colors might not look right or the image might
appear "torn." If this happens, manually select a standard by
clicking either mouse button and cycling through the standards.
Standby Time
This option lets you select how long the lamp stays on and the
blank screen is displayed when the projector enters standby
mode before the projector turns off. Select among 1, 5, 10, and 15
minutes and 1 and 2 hours by clicking either mouse button and
cycling through the options.
Ceiling Projection
When you turn
image upside down for ceiling-mounted projection. Highlight
Ceiling Projection, then click either mouse button to turn this fea-
ture on and off.
j e c t o r
Ceiling Projection
on, the projector turns the