Preparing To Connect Your Equipment To The Projector - InFocus LPTM425z User Manual

Preparing to Connect Your Equipment to the Projector

Now you're ready to connect your equipment. Computers are
connected to the CableWizard. Video players are connected
directly to the projector.
Steps for connecting the different types of equipment are given
on the pages listed below.
Equipment you want to connect
Laptop computer with CableWizard
Desktop computer with CableWizard
USB or PS/2 mouse
Video player
composite
s-video
video
Page
page 10
page 12
pages 10-11,
page 13
page 14
L/R audio in
(for video source)
CableWizard
NOTE: Before you continue,
make sure the projector and your
equipment are turned off. If you' r e
connecting a computer, make sure
the distance between it and the
projector is 10 feet or less.
NOTE: The computer audio in
connector on the connector panel
is only used with the optional
CableWizard Lite cable. If you are
using CableWizard, the audio
cable should be connected to the
CableWizard, not directly to the
projector.
computer
audio in
F 6
IGURE
Connector panel
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
CableWizard. See "Optional
Accessories" on page 48.
9