Table of Contents
Advertisement
Do you want to control your computer's mouse from the projector's
remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable
1 Unplug the mouse cable from your computer.
2 Plug the
end of the CableWizard mouse cable into the
mouse connector on your computer.
3 Plug the
end of the CableWizard mouse cable into the
connector on the CableWizard.
mouse cable
Connecting the CableWizard monitor, audio and mouse cables to a desktop computer
If your computer has a USB connector and is running Windows 98,
use the USB mouse cable
1 Plug the
the mouse connector on your computer.
2 Plug the
end of the CableWizard mouse cable into the
connector on the CableWizard.
You must have the appropriate USB drivers installed on you
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you're ready to power up the projector and your computer.
Skip to "Powering up the Projector and Adjusting the Image" on
page 16.
audio cable
monitor cable
end of the CableWizard mouse cable into
NOTE: A USB mouse is hot-plug-
gable, meaning you do not need to
re-boot your computer after con-
necting the mouse to use it. A PS-2
mouse is not hot-pluggable.
F
10
IGURE
NOTE: The USB mouse is sup-
ported for use with Windows 98
only.
13
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
