THUNDER TIGER TITAN X50 Instruction Manual page 8

Main Rotor System / 主旋翼機構組裝
Bag B
No. Material No. Description
1 METAL FLYBAR CONTROL ARM
BK2184
2 BK2185 METAL FLYBAR CONTROL ARM POST
3 HMC2510B SOCKET SCREW, M2.5×10
4 BK0649-1 LINKAGE BALL(A)
Secure all screws shown on this page with a drop of thredlocker except the screws #7.
除螺絲＃7之外，本頁顯示之螺絲請使用適量防鬆膠鎖固。
BK0649-1
LINKAGE BALL(A)
內六角連接頭螺絲(A)
HME4-5B
SET SCREW,M4x5
無頭內六角螺絲,M4x5
HME3-10B
SET SCREW,M3x10
無頭內六角螺絲,M3x10
(8)
(7)
HMC2510B
SOCKET SCREW,M2.5×10
內六角螺絲,M2.5×10
Thread the Paddles onto the Flybar Rod, equal the
length to the Flybar Control Arms of each side.
旋上穩定翼於穩定翼桿上，確認兩側的穩定翼至控制臂
距離相等。
Line up the Paddles with the Flybar Control Arms.
對正穩定翼與穩定翼控制臂呈水平狀態。
Apply C.A Glue
使用快乾膠黏合
L
Assemble left and right side the same way
R
左右側組件相同
All manuals and user guides at all-guides.com
名稱
金屬穩定翼轉臂
金屬穩定翼轉臂支柱
內六角螺絲, M2.5×10
內六角連接頭螺絲(A)
(5)
(6)
Apply threadlocker
使用螺絲防鬆膠
Qty No. Material No. Description
5 SET SCREW, M4x5
2 HME4-5B
2 6 BK0631 SUS FLYBAR
2 7 HME3-10B SET SCREW,M3x10
2 8 BK0067B FLYBAR PADDLE(BLACK), 20G
(4)
Line up the hole of the Flybar Control Arm
and the flat spot of the Flybar Rod when
securing the screw.
安裝平衡桿時，請確認對正穩定翼控制臂上鎖
固孔位與平衡桿上平面凹槽。
L
R
(4)
Ensure the leading edges of the Paddles are
toward the same side to the Metal Flybar Control
Posts.
確認穩定翼前緣與穩定翼控制轉臂方向相同。
110mm
Ensure smooth, non-binding movement when assembling
確認組件靈活度
-7-
名稱
無頭內六角螺絲, M4x5
穩定桿
無頭內六角螺絲,M3x10
穩定翼(黑), 20G
(3)
(1)
(2)
(8)
(7)
110mm
Qty
2
1
2
2