NordicTrack AudioStrider 600 User Manual page 9

Hide thumbs Also See for AudioStrider 600:
Table of Contents

Advertisement

8. Hold the Left Rear Upper Body Cover (26) and
the Left Front Upper Body Cover (27) around
the Left Upper Body Leg (24).
Attach the Upper Body Covers (26, 27) with five
M4 x 16mm Round Head Screws (80).
Attach the Right Rear Upper Body Cover
(28) and the Right Front Upper Body Cover
(29) in the same way.
9. The Console (11) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents. Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover. Make sure to orient the
batteries as shown by the diagram inside
the battery compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
8
80
80
27
24
9
9
29
28
26
80
11
Batteries
Battery
Cover

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ntel7506.3

Table of Contents