Application Examples and Configuration
3.3 Setting the Transmission Rate
3.3
Setting the Transmission Rate
You can set the transmission rate using the jumpers BR1 and BR2.
NOTE
i
i
If you are using the communication converter for a differential protection or distance protection application
in a SIPROTEC protection device with a protection interface, the jumpers BR1 and BR2 must be plugged into
position 2-3 for 128 kBit/s (factory setting).
Table 3-1
Transmission Rate
5
128 kBit/s
256 kBit/s
512 kBit/s
2048 kBit/s
[dw_jumper_BR1_BR2, 1, --_--]
Figure 3-3
5
For SIPROTEC devices
22
Plug-In Positions
BR1
2-3
1-2
2-3
1-2
Setting the Transmission Rate
Accessories, Communication Converter - Copper/Synchronous Interface, Manual
BR2
2-3
2-3
1-2
1-2
C53000-B1174-C190-1, Edition 01.2022