Clock Function - Icom IC-F9511HT Instruction Manual

2
BASIC OPERATION
n Clock function
The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format
and time/date settings.
When you use the transceiver for the first time, or after the
transceiver has been left unused for a long time, make
sure to check the date and time indication after turning the
power ON. If the time and date are not correct, reset
them.
D Time and date indication
q Push [Clock] to indicate the current time and date on the
LCD.
• When the indication format is set to 12-hour, "AM" or "PM" is
indicated.
• The LCD indication returns to the stand-by mode after 30 sec.
has passed with no operation.
The time indication format (12-hour/24-hour)
1 2 H R
Y M D
Date indication format (Y: Year, M: Month, D: Day)
w Push [Clock] again to return to the stand-by mode.
9
Time
1 2 : 0 0 P M
0 8 - 0 4 - 0 1
D Time and date settings
q Push [Clock] to indicate the current time and date on the
LCD.
1 2 H R
Y M D
w Push and hold [Clock] for 1 sec. to enter the time and date
setting mode.
• The time indication format, "24HR" or "12HR" blinks.
e Push [Clock] to select the desired item to be changed.
r Push [CH Up] or [CH Down] to set the selected item.
1 2 H R
Y M D
Date
1 2 : 0 0 P M
0 8 - 0 4 - 0 1
1 2 H R 1 2 : 0 0 P M
Y M D 0 8 - 0 4 - 0 1
0 3 : 0 0 P M
0 8 - 0 4 - 0 1