Clock Function - Icom IC-F9011B Instruction Manual

3
BASIC OPERATION

■ Clock function

The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format
and time/date settings.
When you operate Non display type, this function is not
available.
When you use the transceiver for the first time, or after the
transceiver has sat unused for a long time, make sure to
check the date and time indication after turning the power
ON. If the time and date are not correct, reset them. (See
'Time and date settings' at right.)
D Time and date indication
q Push [Clock] to indicate the current time and date on the LCD.
• When the indication format is set to 12-hour, "AM" or "PM" is
indicated.
• The LCD indication returns to the stand-by mode after 30 sec.
has passed with no operation.
The time indication format (12-hour/24-hour)
12HR 12:00PM
YMD 08-04-01
MUTE
Date indication format (Y: Year, M: Month, D: Day)
w Push [Clock] again to return to the stand-by mode.
15
Time
Date
CLOCK ZONE
D Time and date settings
q Push [Clock] to indicate the current time and date on the
LCD.
12HR 12:00PM
YMD 08-04-01
MUTE CLOCK
w Push and hold [Clock] for 1 sec. to enter the time and date
setting mode.
• The time indication format, "24HR" or "12HR" blinks.
12HR 12:00PM
YMD 08-04-01
MUTE
e Push [Clock] to select the desired item to be changed.
ZONE
CLOCK ZONE