Digital Personal Id (Dp-Id) Feature; About The Digital Personal Id (Dp-Id) Feature; Registering The Dp-Id To A Dr-2X Digital Repeater; Dr-2X Remote Control Feature - Yaesu FTM-200DR Advance Manual

Digital Personal ID (DP-ID) feature

About the Digital Personal ID (DP-ID) feature

When operating in digital C4FM communications, each transceiver is programmed with,
and sends its own individual ID information (Radio ID) in each transmission. The DP-ID
function and the individual identification information, makes possible group communica-
tions between stations that are within communications range. The Digital Personal ID
(DP-ID) feature opens the speaker audio only when a signal set to the same DP-ID in
the Digital Mode is received, even if each transceiver is set to a different Digital Group ID
(DG-ID) number.
To utilize this function, Digital C4FM mode transceivers compatible with the DG-ID function
are required.

Registering the DP-ID to a DR-2X digital repeater

After registering the transceiver's DP-ID to the DR-2X repeater, the settings and functions
of the DR-2X can be remotely controlled. Remote control cannot be performed from a
transceiver that has not been registered with the DP-ID, so it is possible to securely man-
age repeaters. The transceiver with DP-ID registered in DR-2X is allowed preferential
access in an emergency, even when used without the DG-ID setting.
To register the transceiver DP-ID in the DR-2X C4FM digital repeater, refer to the DR-2X
instruction manual.

DR-2X Remote Control Feature

To display the FTM-200D remote-control screen while in C4FM digital mode, press and
hold the [] key on the microphone. To return to normal mode, press the [] key on the
microphone. For details on the remote-control function of the DR-2X, refer to the DR-2X
instruction manual.
•
•
•
•
•
•

Registering the DP-ID of other stations

• Once registered, the DP-ID is stored until deleted.
• Register each other's DP-ID with nearby transceivers.
• When setting the DG-ID code to "00", the transceiver will receive signals from all digital
C4FM stations. To utilize the DP-ID function, it is necessary to set the receive DG-ID code
to a number other than "00".
1. Press and hold the [F
• The DP-ID list is displayed.
• If several DP-IDs are displayed, rotate the DIAL
knob to register the desired DP-ID.
Activate the repeater operation
Deactivate the repeater operation
Set the repeater to C4FM mode
Set the transmit power
Voice Message Control (Rec / Play / Stop)
Set the Emergency Call
] key  [57 DP-ID LIST]  Press the DIAL knob
MENU
6