Smart Navigation Function; Real-Time Navigation Function; Backtrack Function - Yaesu FTM-200DR Advance Manual

Dual band digital transceiver
Hide thumbs Also See for FTM-200DR:
Table of Contents

Advertisement

Smart Navigation Function

GPS position information and voice signals are simultaneously transmitted in the V/D
mode of C4FM digital. Consequently, the position and direction of the remote station can
be displayed in real time, even while communicating.
To use the "latitude/longitude display" with the smart navigation function, press and hold the
] key  [5 LOCATION INFO] and set to "NUMERIC
[F
MENU
"COMPASS")

Real-Time Navigation Function

1. Press and hold the [F
2. Rotate the DIAL knob to select [BACKTRACK] then press the DIAL knob.
The distance and direction to the remote station operating on the same frequency in the
V/D mode are displayed.
The screen selected in "7 DISPLAY MODE" can be called by simply pressing and holding
the [DISP] key.
Callsign of other station
HUP: Heading up
NUP: North UP
: Display of other station
: Display of this station
Distance to other station
On the real-time navigation screen, press the PTT switch to communicate with the
partner station by voice as usual. You can be also change the communication mode and
frequency, and recall memory channels.
z Switch between partner station display and own station display
1. In the Real-Time Navigation screen, press the [F
2. Rotate the DIAL knob to select "
this station) then press the DIAL
"
" or "

Backtrack Function

By registering a navigation point in advance (such as the departure point), the distance
and direction to the registered point from the current position can be displayed in real
time.
z Registering the Current Position (Departure Point)
1. In the Real-Time Navigation screen, press the [F
2. Rotate the DIAL knob to select "
knob.
3. Press the [F
] key  [7 DISPLAY MODE]  Press the DIAL knob
MENU
" icon is displayed on the screen.
] key.
MENU
] key.
MENU
" (Display of other station) or "
knob.
] key.
MENU
" (Display of your station) then press the DIAL
18
"
. (The factory setting is
Direction to the other station
Heading of this station
" (Display of

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftm-200de

Table of Contents