Setup Menu Operations
DISPLAY
1 FREQUENCY INPUT
In VFO mode, the screen for direct input of frequency is displayed, and in memory mode,
the screen for direct input of Memory Channel number is displayed. Select the [MEMORY
CH LIST] button on this screen and press DIAL knob to open the memory channel list
screen.
1. Press and hold the [F
2. Rotate the DIAL knob to select a number and press the DIAL knob to enter.
NOTE: This item is registered in the custom function menu by factory setting.
2 LCD BRIGHTNESS
The brightness of the display and key buttons can be changed.
1. Press and hold the [F
2. Rotate the DIAL knob to select the brightness from the following 3 levels:
MIN / MID / MAX
3 FREQUENCY COLOR
The display color of the frequency of the operation band can be changed.
1. Press and hold the [F
2. Rotate the DIAL knob to select the display color:
WHITE / BLUE / RED
4 BAND SCOPE
Set the number of channels to be displayed when the BAND SCOPE function is used.
1. Press and hold the [F
2. Rotate the DIAL knob to select the number of channels to search.
WIDE
NARROW
Refer to the Operating Manual for details.
5 LOCATION INFO
Set the display presentation on the smart navigation screen.
1. Press and hold the [F
2. Rotate the DIAL knob to select what is displayed on the screen.
COMPASS
NUMERIC
] key [1 FREQUENCY INPUT] Press the DIAL knob
MENU
] key [2 LCD BRIGHTNESS] Press the DIAL knob
MENU
] key [3 FREQUENCY COLOR] Press the DIAL knob
MENU
] key [4 BAND SCOPE] Press the DIAL knob
MENU
61 channels (VFO mode), 21 channels (Memory mode)
31 channels (VFO mode), 11 channels (Memory mode)
] key [5 LOCATION INFO] Press the DIAL knob
MENU
Displays the compass.
Displays the latitude and longitude.
46