Basic Telephone Operation - iDect X2i User Manual

All manuals and user guides at all-guides.com
Installation continue...
5. Fitting the rechargeable batteries into the Handset.
The One rechargeable battery pack comes with your phone.
A. Remove the battery compartment,
B. Plug the battery connector into the socket at the top of
The battery compartment.
C. Place the battery in the compartment
D. Fit the battery compartment cover, sliding it into place
+
and pressing firmly to make sure it is secur.
NOTE: Always use the battery pack supplied - never use
any other kind of batteries in the handset
+ +
6. Charge the batteries for 15 hours.
Before you use the Handset for the first time, it's important
to fully charge the batteries. You hear a 'beep' when the
Handset is positioned correctly on
the charging cradle.
Leave the Handset on the Base unit
or charger pod for 15 hours.
To keep the batteries charged,
whenever you don't need to use
the Handset (such as overnight,
or when you go out), leave it on
the Base unit or charger pod.
7. Connect the base unit to the
telephone line connection jack.

3. Basic Telephone operation

The Speakerphone Press the SPEAKERPHONE button to listen on
calls without holding the Handset near to your ear.
You can start a call by pressing the
SPEAKERPHONE button, or press it at any time
during a call; but you must always press the
PHONE button to end a call.
4