Adjusting The Monitor Audio Level - Sony UWP-D21 Operating Instructions Manual

2
Press and hold the SET button for one second or
longer.
Press and hold until the channel group and "+"
display starts flashing.
3
Press the + button.
The tuner starts to scan for active channels in the
selected channel group. When active channels are
found, the first channel number among the active
channels starts flashing on the display.
To display the next active channel number
Press the + button.
To cancel searching
Press the – button. The display returns to the ACT CH
SCAN menu.
4
Press the SET button when the desired channel
number starts flashing.
The search for active channels finishes and the
displayed channel is set.
Procedure for portable diversity tuner
(URX-P41D)
1
Press the MENU button to display the RX1 menu or
RX2 menu, then press the + or – button to display the
ACT CH SCAN screen.
2
Press and hold the SET button for one second or
longer.
Press and hold until the channel group and "+"
display starts flashing.
3
Press the + button.
The tuner starts to scan for active channels in the
selected channel group. When active channels are
found, the first channel number among the active
channels starts flashing on the display.
To display the next active channel number
Press the + button.
To cancel searching
Press the – button. The display returns to the ACT CH
SCAN screen.
4
Press the SET button when the desired channel
number starts flashing.
The search for active channels finishes and the
displayed channel is set.

Adjusting the monitor audio level

Procedure for portable diversity tuner (URX-P40)
You can set the monitor audio level within the range 1 to
16.
1
Press the + or – button to display the PHONES menu.
The current monitor audio level is displayed.
2
Press and hold the SET button for one second or
longer.
Press and hold until the monitor audio level flashes.
3
Press the + or – button to set the desired monitor
audio level, then press the SET button.
The setting value is stored. The setting is retained
even after the power is turned off.
Procedure for portable diversity tuner
(URX-P41D)
1
Press the MENU button to display the meter screen,
then press the + or – button to display the PHONES
screen.
The current monitor audio level is displayed.
2
Press and hold the SET button for one second or
longer.
Press and hold until the monitor audio level flashes.
30