Display - Carrier FLOTRONIC II 30GN040-420 Operating And Troubleshooting Manual

SUBFUNCTION
3 PERIOD 1 (cont)
To toggle between inputs (Yes/No) Press:
4 PERIOD 2
5 PERIOD 3 ... 9 PERIOD 7
10 PERIOD 8
11 HOLIDAYS
New = Unassigned Holiday Date
For example: To enter July 4th holiday press: 07.04.01
operation, refer to Schedule Function section on page 44.
To view and modify configurations, the password must be entered under the log on subfunction.
SUBFUNCTION
1 LOG ON AND LOG OFF
At this time, configurations may be modified. When finished viewing and/or modifying configurations, log out as follows:
2 VERSION
The next 3 subfunctions provide the ability to modify configurations. Refer to separate Installation, Start-Up, and Service Instructions
supplied with unit for further information on changing configurations.
To change a configuration, enter the new configuration and press
3 FACTORY
CONFIGURATION
Table 9 — Keypad Directory (cont)
SCHEDULE (cont)
KEYPAD ENTRY
FRI X
SAT X
SUN X
HOL X
(no) or (yes)
PERIOD 2
PERIOD 3 ...
...
PERIOD 7
PERIOD 8
HOLIDAYS
DAT MM.DD
DAT MM.DD.NN
. Display shows Jul 04. For further information on the Schedule function and its
SERVICE
KEYPAD ENTRY

DISPLAY

PASSWORD
LOGGEDON
LOGGEDON
LOG OFF
EXIT LOG
VERSION
XXXXXXXX
while on the correct configuration.
FACT CFG
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
32
DISPLAY
Friday Flag (yes/no)
Saturday Flag (yes/no)
Sunday Flag (yes/no)
Holiday Flag (yes/no)
Period 2 Time Schedule
Period 3 ... Period 7 Time Schedule
Period 8 Time Schedule
Define Calendar Holidays
Holiday Date 1
Holiday Date 30
Enter Password/Disable Password Protection
Logged On
—
Disable Password Protection
Logged Off/Enable Password Protection
Software Information
Version No. of Software (CESRXX)
Factory Configuration Codes
Configuration Code 1
Configuration Code 2
Configuration Code 3
Configuration Code 4
COMMENT
COMMENT