Status Function; Display - Carrier FLOTRONIC II 30GN040-420 Operating And Troubleshooting Manual

SUBFUNCTION
4 STAGE
5 SET POINT
6 TEMPERATURE
LEGEND
CCN — Carrier Comfort Network
EXV — Electronic Expansion Valve
MOP — Maximum Operating Pressure
Table 9 — Keypad Directory (cont)
STATUS (cont)
KEYPAD ENTRY

DISPLAY

STAGE
COOL X
CAPT X
CAPA X
CAPB X
AVAIL X
AV A X
AV B X
LMT X†
CIRA X
CIRB X
SMZ X
SETPOINT
SET X
MSP X
TW X
TEMPS
EWT X
LWT X
SCTA X
SSTA X
CTA X
SHA X
SCTB X
SSTB X
CTB X
SHB X
SPC X
OAT X
Capacity Staging Information
Number of Requested Stages
Percent of Total Capacity
Percent Circuit A Total Capacity
Percent Circuit B Total Capacity
Percent Available Capacity
Percent Circuit A Available Capacity
Percent Circuit B Available Capacity
Demand Limit Set Point (percent)
Circuit A Compressor Relay Status
Circuit B Compressor Relay Status
Load/Unload Factor for Compressors
Factor = 1 Unloader Factor = 0.6
Fluid Set Point Information
Set Point (F)
Modified Set Point = Set Point + Reset (F)
Actual Control Temperature (F)
Temperature Information (F)
Cooler Entering Fluid Temperature (F)
Cooler Leaving Fluid Temperature (F)
Circuit A Saturated Condenser Temperature (F)
Circuit A Saturated Suction Temperature (F)
Compressor A1 Suction Temperature (F)
Circuit A Suction Superheat (F)
Circuit B Saturated Condenser Temperature (F)
Circuit B Saturated Suction Temperature (F)
Compressor B1 Suction Temperature (F)
Circuit B Suction Superheat (F)
Space Temperature (F)
Outdoor-Air Temperature (F)
*Will read ALARM or ALERT as appropriate.
†Must be configured.
**If applicable.
††Not manually resettable.
NOTE: If metric option is selected under
expressed as Celsius and pressure will be expressed as kPa.
28
COMMENT
, temperature