Hunter 44905 Owner's Manual page 16

Scheduling
Setting Your Schedule
10. When you have completed scheduling your day, you will be returned to the copy day
screen. The copy day screen will now show
you just scheduled to any other days. Select
schedule too. Press the
to save changes and select a new day individually.
11. Select each day you wish to copy the schedule to by touching it on the screen directly. The
arrow indicators beside each day you select will show to indicate the day has been selected.
In figure 12 you will see Tue - Fri have been selected.
Note: The original day scheduled will not show on the screen as it is the one being
copied.
You may use a pen or other small instrument to select the days if necessary.
12. Press on the screen and it will flash "Mon coppied to (days selected)"
Done
and return you to the day select screen to program another day if any are left
unprogrammed. Repeat steps 3-12 until all days are scheduled. Pressing
any time will return you to the home screen without saving changes.
Note: You can press the
the scheduling.
13. Once all days are programmed, you will be taken back to the Home Screen. If
you need to make any changes, press the
16
5
Copy
day to...
Copy
day to...
button to ignore changes and return to the home screen, or
Cancel
at anytime while in Scheduling Mode to turn on or off
Turn
Schedule
On Off
44040-01 • 03/24/2010
and ask you if you wish to copy the day
and choose the days you wish to add the
button to reenter schedule edit mode.
Schedule
Done
at
Cancel