Hunter 44905 Owner's Manual page 14

Scheduling
Setting Your Schedule
6. Set the temperature for your heating cycle as indicated by the flashing "Heat to" icon on your
screen. Use the
7. You will be asked to set your cooling cycle, indicated by the flashing "Cool to". Set this
temperature with your
8. The thermostat will start this process again for "Asleep". Repeat steps 1-9 to schedule the
time and set the temperature for your sleep period. When finished pressed
Home"
9. When setting "At Home", you will only be asked to set a temperature. The thermostat
calculates your "At Home" time by what remains unscheduled from your "Away" and
"Asleep" periods. Set your "Heat To" temperature first and press
To" temp and press
Note: You do not have to schedule all periods in order. Press any scheduled period
on the scheduling screen to bypass the others if you only need to make a single change
or you can press
14
and buttons to change the temperature and press
or buttons and hit
To finish Scheduling your current day.
Done
to exit.
Done
44040-01 • 03/24/2010
5
.
Next
.
Next
to get to "At
Next
, then Set your "Cool
Next