Topic 10 Controller Utilities; View/Change Container Id - Carrier Container Refrigeration Unit Operating Instructions Manual

TOPIC 10 CONTROLLER UTILITIES

This section describes the features available on the controller utilities.

View/Change Container ID

This will allow the user to view and modify the current container ID read from the controller. Upon changing the
container ID, the new ID is sent to the controller, the DataView program informs the user that the container ID was
successfully sent, and returns the user to the System Tools Screen. The following screen is displayed when this option
is chosen.
Upon pressing <ESC> to Cancel, the container ID is canceled and the user is returned to the System Tools Screen.
3-11 62-02575-07