Control Center Menu Bar Features
File
Send Plot File
Download Firmware
Exit
Communications
Settings
Send Command
Automatic Buffer
Closing
USB Info
Tools
Aux Sensor
Cartridge Calibration
Size Calibration
About Your FlexJet
FlexJet Licensing
Help
Contents
About
Print a PLT or PLX file.
Allows the user to download the lat-
est firmware version for the printer.
See the section Downloading Firm-
ware in the Routine Maintenance
chapter for more information.
Exit the Control Center.
Select the COM port and baud rate
to match the printer.
Permits advanced users to manually
enter commands.
Creates an End of Frame command
after a long communications delay.
By default this is set to On. Turn off
for MAC computers.
USB Info displays hardware and
driver information about the direct
USB connection.
When checked, disables the Paper
Out sensor. The default is On. (The
Paper Out sensor is an option on the
printer.)
Displays tools to adjust print
cartridge alignment. See Routine
Maintenance for more details.
Allows adjustment of the size cali-
bration settings. See Routine Main-
tenance for more details.
Displays the licensing status of the
machine.
Displays the licensing status and
licensing updates.
Displays the Help file.
Displays Control Center version
information.
27
Chapter 3: Operation