Perkins 1106C Series Disassembly And Assembly page 44

44
Disassembly and Assembly Section
Illustration 77
1. Loosen bolts (2) and (5) in reverse numerical
order. Refer to Illustration 77.
Note: This will help prevent distortion of the exhaust
manifold.
2. Remove center bolts (2) from exhaust manifold
(3). Remove outer bolts (5) and spacers (4) from
exhaust manifold (3).
Note: Support the manifold as the bolts are removed.
3. Remove exhaust manifold (3).
4. Remove exhaust manifold gaskets (1).
5. If necessary, remove studs (6) from exhaust
manifold (3).
Installation Procedure (Side
Mounted Exhaust Manifold)
Table 13
Required Tools
Tool Part Number
-
A
-
B
Part Description Qty
Guide Stud
4
(M10 by 100 mm)
-
Loctite 575
KENR6932
g01335790