Perkins 1106C Series Disassembly And Assembly page 12

12
Disassembly and Assembly Section
1. If the engine is equipped with a cover over the fuel
system this will need to be removed.
Illustration 13
The fuel manifold is shown with fuel injection lines in position.
2. If fuel sensor (5) has not been removed from
fuel manifold (3), slide locking tab (4) into the
unlocked position. Disconnect the plug on harness
assembly (9) from fuel pressure sensor (5).
3. Disconnect tube assembly (7) from the fuel
pressure relief valve on fuel manifold (3).
Immediately cap the open port in fuel manifold (3)
with a new cap. Immediately plug the open end of
tube assembly (7) with a new plug.
4. Remove bolts (2) from fuel manifold (3).
5. Remove the bolt from fuel injection line clamp (6).
Remove clamp assembly from the bracket.
6. Remove bracket (1) from fuel manifold (3).
7. Remove fuel manifold (3) from mounting bracket
(8).
Installation Procedure
Ensure that all adjustments and repairs that are
carried out to the fuel system are performed by
authorised personnel that have the correct train-
ing.
Before begining ANY work on the fuel system, re-
fer to Operation and Maintenance Manual, "Gen-
eral Hazard Information and High Pressure Fuel
Lines" for safety information.
Refer to System Operation, Testing and Adjusting,
"Cleanliness of Fuel System Components" for de-
tailed information on the standards of cleanliness
that must be observed during ALL work on the fu-
el system.
1. Ensure that all ports on the fuel manifold are
capped. Ensure that the fuel manifold is externally
clean and free from damage.
g01335251
Note: Do not install a fuel manifold that has not
been capped. All caps must be left in place until the
fuel injection lines or the fuel pressure sensor are
installed.
Illustration 14
The fuel manifold is shown with fuel injection lines in position.
2. Position fuel manifold (3) on mounting bracket (8).
3. Install bracket (1) from fuel manifold (3).
4. Install bolts (2) to fuel manifold (3) finger tight.
KENR6932
NOTICE
g01335251