AL-1000/1010
(7) Remove the plate spring on the right and remove the
heater lamp.
2)
Hearter lamp
(8) Remove the spring and remove the separation pawls (3
pcs.).
3)
2)
1)
(9) Remove the E-ring and remove the reverse gate.
3)
1)
(10) Remove the pressure release levers on the right and the
1)
(11) Remove the pressure roller, the pressure bearing, and the
Note: Apply grease to the sections specified with
Heat roller disassembly
(Continued from procedure (4).)
(5) Remove screws, remove the fusing cover, and open the
2)
8-6
left sides.
1)
pring.
1)
3)
2)
heat roller section.
3)
2)
1)
.
Pressure roller
1)
2)
3)
1)
3)
2)