Transom Angle Adjustment - Honda BF15D Owner's Manual

TRANSOM ANGLE
ADJUSTMENT
(manual tilt SH type/LH type)
ADJUSTING ROD
LOCKED POSITION PINCH
(manual tilt XH type/R type)
ADJUSTING ROD
(G type/T type)
(XH type/R type/ G type/T type)
UNLOCKED
POSITION
TURN UP
PUSH
LOCKED POSITION
T T U U R R N N U U P P
P P U U S S H H
ADJUSTING ROD
TO CHANGE
ADJUSTING ROD
TO LOCK
OPERATION
The transom angle adjusting rod
limits the tilt angle of the outboard
motor when fully lowered.
Proper adjustment prevents the
outboard motor from being tilted too
low (p. 57 ).
To adjust, first tilt the outboard
motor so it is not resting on the rod.
(manual tilt SH type/LH type)
Pinch the end of the rod.
Remove the rod and reinsert it in the
desired position.
Push the rod in and hook the end of
the rod. Then release the rod.
(XH type/R type/ G type/T type)
Push the rod in and turn the end of
the rod up, so the latch will fall into
line with the rod.
Push the rod in and turn the end of
the rod down, so the latch will fall to
the locked position. Then release the
rod.
41