Transom Angle Adjustment (Lh Type) - Honda bf50d Owner's Manual

TRANSOM ANGLE
ADJUSTMENT (LH Type)
STERN BRACKET
TURN UP
PUSH
TRANSOM ANGLE ADJUSTING ROD
TRANSOM ANGLE ADJUSTING ROD
UNLOCKED
TO CHANGE
POSITION
TO LOCK LOCKED POSITION
The transom angle adjusting rod
limits the tilt angle of the outboard
motor when fully lowered.
Proper adjustment prevents the
outboard motor from being trimmed
too low (p. 63).
To adjust, first tilt the outboard motor
so it is not resting on the rod.
Push the rod in and turn the end of the
rod up, so the latch will fall into line
with the rod.
Remove the rod and reinsert it in the
desired position.
Push the rod in and turn the end of the
rod down, so the latch will fall to the
locked position. Then release the rod.
OPERATION
Do not allow water to enter the idle
exhaust port or the engine can be
damaged.
IDLE EXHAUST PORT
45