Setup
Setup
When unpacking sprayer for the first time or
after long term storage perform setup
procedure.
1.
Fill throat packing nut with TSL.
12
Front Wheel Alignment
1.
Loosen cap screw.
ti6392a
2.
Position front wheel left or right, as
necessary, to straighten alignment.
3.
Tighten cap screw. Gently push striper
and let striper roll without holding on to
the striper. Note if striper rolls straight or
veers right or left. Repeat steps 1 and 2
until striper rolls straight.
3A9031A