Travis Industries 430 Mod-Fyre GSR2 Manual page 56

56
Optional Equipment
2. Spread an even layer of crushed glass over the media tray and burner. The glass must
be only 1 layer thick on the burners but can be 2 layers thick on the media tray.
3. Make sure glass does not drop down into the pilot area below the cover and that the
opening indicated below remains open.
4. The firebox should look like the picture below when the glass installation is complete.
© Travis Industries
(for qualified installers only)
No glass in
this area.
5/20/2021 - 1558 430 MF GSR2