Table of Contents
Advertisement
C. INSTALLING THE BATTERY PACK
1. Unscrew the vehicle's battery box cover with a flat head screwdriver (not included).
2. Connect the battery pack's vehicle connector to the vehicle's battery connector.
3. Make sure the connectors are tightly attached and close the battery box cover.
IMPORTANT!
• Turn off the vehicle after play. Leaving a discharged battery pack in a vehicle for a
prolonged period of time can severely damage the battery. Always charge the battery
prior to storage.
• As a reminder to switch the vehicle OFF after play, the front wheels will suddenly move
left and right if left idle for a few minutes with the power still switched on.
8
D. PAIRING THE REMOTE CONTROLLER AND VEHICLE
1. Slide the ON/OFF switch to I (ON) on the remote controller, and a green LED will light up if
there is sufficient battery power.
2. Slide the ON/OFF switch to I (ON) on the vehicle to complete the pairing process.
3. If the vehicle does not respond to the remote controller, turn the vehicle and remote
controller OFF then ON to try pairing them again.
E. THROTTLE/STEERING TRIM
It's recommended that you check the vehicle's throttle and steering alignment before play.
THROTTLE TRIM
1. Press and release the throttle trigger.
2. If the vehicle continues to move forward after the throttle trigger is
released, turn the throttle trim dial clockwise or counterclockwise
until it stops.
STEERING TRIM
1. Drive the vehicle forward to see if it is driving straight.
2. If the vehicle automatically steers toward the right/left, turn the
alignment trim dial to the opposite direction until the vehicle goes
in a straight line.
9
Advertisement
Table of Contents
