Table of Contents
Advertisement
General Information
MAIN
POWER
SWITCH
MAIN
POWER
FUSE
corner when facing the back panel. To its right are two line voltage selection
switches. The main power fuse is located below the power switch. The AC power
connector is in the lower left corner. An RS-232 connector is at the bottom center.
The various safety listing approvals and the serial number are located on the
bottom of the universal programmer.
Physical Specifications
Dimensions: iUP-200A/201A:
Weight:
Reading Temperature Range:
Programming Temperature Range:
Operating Humidity Range:
Electrical Specifications
Operating Voltage: Selectable 100, 120, 220, or 240 VAC (each within
Power Consumption: iUP-200A/201 A, maximum 120 watts
1-4
CORD
CONNECTOR
Figure 1-3 Universal Programmer Back Panel
Depth
15"
Personality Module:
15 pounds maximum
RJP-200A/201A:
1 pound maximum
Personality Module:
10 to 40 degrees C.
25 ± 5 degrees C.
10% to 85% RH
(non-condensing)
± 10%) at 47-63 Hz single phase grounded.
CONNECTOR
Height
Width
15"
5.5"
7"
RJP-200A/201A
0025
6"
1.6"
Advertisement
Table of Contents
