Goodman SS-CPC36-72 Specifications page 27

p s
rodUCt peCifiCations
U C
nit learanCes
Maintain an adequate clearance around the unit for safety, service,
maintenance, and proper unit operation. Leave a total clearance
of 75" on the main control panel side of the unit for possible
removal of fan shaft, coil, electric heat, and gas furnace.
Leave a clearance of 48" on all other sides of the unit for
possible compressor removal or service access, and
to ensure proper ventilation and condenser
airflow. Do not install the unit
Beneath any obstruction. Install
the unit away from all building
exhausts to inhibit ingestion of
exhaust air into the unit's fresh-air
intake.
e e l
leCtriCal ntranCe oCations
High-Voltage Entrance
(Remove Plug)
12 "
30¼"
Low-Voltage Entrance
3½" Dia.
Power Thru
the Curb
47½"
7½"
SS-CPC36-72 www.goodmanmfg.com 27