Installing The Battery - Dell Inspiron 16 Plus 7640 Owner's Manual

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information, see step 6 in
computer.
2. Remove the base cover.
About this task
The following image(s) indicate the location of the battery and provides a visual representation of the removal procedure.
Figure 25. Removing the battery
Steps
1. Disconnect the battery cable from its connector (BATT1) on the system board.
2. Remove the five screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
3. Lift the battery off the palm-rest and keyboard assembly.

Installing the battery

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the battery and provides a visual representation of the installation procedure.
Before working inside your computer.
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
51