Table of Contents
Advertisement
The Initial Settings Menu
DTS Out
Default setting: Off
l
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to Off. Check the
manual that came with the other componen
if you're unsure whether it is DTS compat-
i ble.
Note
If you set to DTS with a non-DTS
l
compatible amplifier, noise will be
output when you play a DTS disc.
96kHz PCM Out
Default setting: 96kHz > 48kHz
l
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
E n
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to 96kHz,
otherwise set it to 96kHz > 48kHz (96 kHz
audio is converted to a more compatible 48
other component if you're unsure whether it
is 96 kHz compatible.
MPEG Out
Default setting: MPEG > PCM
l
You only need to make this setting ifyou
connected this sys tern to an AV receiver (or
other component) using one of the digital
outputs.
Options
If your AV receiver (or other connected
component) is compatible with MPEG audro,
set this to MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio), Check the manual
that came with the other component if you're
unsure whether it is MPEG audio compat-
i ble.
Advertisement
Table of Contents
