The Initial Settings Menu; Digital Audro Out Settrngs; Digital Out; Dolby Digrtal Out - Pioneer DV-C505 Operating Instructions Manual

CDC
1
The Initial Settings Menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settrngs,
audience limitation settings, among others.
If an option is grayed out It means that it
cannot be changed at the current time. This
is usually because a drsc is playing. Stop the
disc, then change the setting.
1 Press SETUP and select 'Initial Set-
tings' from the on-screen display.
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
6z1
Note
l
The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region,
Digital Audio Out settings
Digital Out
l
Default setting:
On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If at any trme you need to switch off the
digital audro output, set this to Off, other-
wise leave It
On.
Note that you can't switch on/off the optical
and coaxial outputs individually.
Dolby Digital Out
l
Default settrng:
Dolby Digital
You on/y need to make this sefflng ifyou
connected this system to an AV receiver (or
other component) using one of the digital
oufouts.
If your AV receiver (or other connected
component) is Dolby DIgItal compatible, set
to
Dolby Digital,
otherwrse
set
to
Dolby
Digital > PCM.
En