Table of Contents
Advertisement
Switching on
After making sure that everything is con-
nected properly and that the player is
plugged in, press
front panel, or on the remote control to
switch the player on,
Also, switch on yourn/ and make sure that it
is set to the input you connected the DVD
player to.
My DVD player switches on but there is
l
nothing displayed on my TL!
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
VIDEO 1
player to the
TV to VIDEO I,
switch your
Note
This player features a screen saver and
l
an auto power off function. If the player
is stopped and no button is pressed for
five minutes, the screen saver starts, If
the disc tray is closed but no disc is
playing and no control is pressed for 30
minutes, the player automatically goes
into standby.
on the
inputs on your TV
Let's Get Started
When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the player to work with the kind of TV you
have, then either use the Setup Navigator to
make more settings, or jump right in and
start playing some discs.
1
Press ENTER to move on to the next
screen.
E n
Advertisement
Table of Contents
