Getting Started Using Your Dvd Player; Playing Dvds, Video Cds, Cds And Mp3S - Pioneer DV-444 Operating Instructions Manual

Getting Started
Using Your DVD
Player
Playing DVDs, Video CDs, CDs
and MP3s
– DVD/Video CD/CD/MP3
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the next section to set up
the player to correspond to your home system. Having
made these settings, you are now ready to start using
the player to enjoy DVDs, Video CDs, CDs and MP3.
1
5
4
1 2
STANDBY/ON
FL DIMMER
20
En
LAST
CONDITION OPEN/
2
MEMORY MEMORY CLOSE
0
AUDIO SUBTITLE ANGLE DISPLAY
MENU TOP MENU
SETUP
RETURN
5
5
ENTER
PREV NEXT
4 ¢
STOP PLAY PAUSE
7 3 8
STEP/SLOW FWD
REV
e E 1 ¡
CLEAR
1 2 3 C
5 6
4 +10
7 8 9 0
PROGRAM REPEAT REPEAT SEARCH MODE
A-B
TV CONTROL
RANDOM
TV
VOLUME CHANNEL
FUNC
TV
Î
3 4
DVD PLA YER
7 8 Î
4 1 ¡ ¢
0 3
1
Press ( STANDBY/ON on the front
panel) .
2
Press OPEN/CLOSE 0 (0 on the front
panel).
The disc tray comes out.
3
Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc.
4
Press PLAY 3 (3 on the front panel).
• The disc tray closes, and playback begins.
• MP3 only: It may take a few seconds for the
player to locate the track on the disc, depending
on the complexity of the file structure. During this
time, "Please wait a moment" is displayed.
• Depending on the disc, a menu may be
displayed. If a menu is displayed, proceed to
step 5.
5
Select the item you want to view.
• When a DVD is loaded:
Select the item with the cursor buttons (2/3/5/
∞) or the number buttons then press ENTER.
• When a Video CD is loaded:
Use the number buttons to select the item.
Notes
• Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder.
Check that the digital audio output format selected in the
Audio 1 menu corresponds to the audio components you
have made connections to (pages 26, 27).
• The TV screen size is factory set to present the wide screen
format (16:9 aspect ratio). If you have a standard TV screen
(4:3 aspect ratio), this setting can be changed to match your
TV screen size in the Video 1 menu (page 29).
When an operation is prohibited
There are times when you are using the player and
attempt to perform an operation, but for some reason
it cannot be performed. When this occurs, one of the
two following icons appears on the screen.
The operation is prohibited by the player.
The operation is prohibited by the programming
on the disc.