Default Nav Page - Garmin GNS 400W Pilot's Manual & Reference

Default Nav Page

During most flights, the default NAV, map and
NAVCOM pages will be the primary pages used for
navigation. The default NAV page displays a graphic
course deviation indicator (CDI), the active leg of
your flight plan (as defined by the current "from" and
"to" waypoints), and six user-selectable data fields.
The default settings for these fields are distance to
waypoint (DIS), desired track (DTK), bearing to
waypoint (BRG), ground speed (GS), ground track
(TRK) and estimated time en route (ETE). See Sec-
tion 11 for definitions of these navigation terms. The
default NAV page is selected by pressing and holding
the CLR key or turning the small right knob.
Active Leg of
Course Deviation Indicator (CDI)
Flight Plan
Default NAV Page
To change the data fields in the corners of the
Default NAV Page:
1. Press MENU (with the Map Page displayed).
Turn the large right knob to highlight
2.
"Change Fields?" and press ENT.
3. Turn the large right knob to highlight the
data field you wish to change.
Turn the small right knob to select the type
4.
of data you want to appear on this field and
press ENT.
User-
selectable
Data Fields
5. Press the small right knob to remove the
cursor.
190-00356-00 Rev G
TAKEOFF TOUR
Default Nav Page
13