Restoring Factory Settings; Setup 2 Page - Garmin GNS 400W Pilot's Manual & Reference

the United States, all local time offsets will use
be minus, or behind UTC.)
Press ENT to accept the selected offset.
4.

Restoring Factory Settings

When making changes to any setup 1 page option,
a "Restore Defaults?" menu selection allows you to
restore the original factory settings (for the selected
item only). For example, with the airspace alarms page
displayed, the "Restore Defaults?" option will restore
all airspace alarms page settings to the original factory
values.
To restore a Setup 1 item to the original factory
settings:
1. Select the desired item from the Setup 1
page.
2. Press MENU to display a page options
window.
3. With "Restore Defaults?" highlighted, press
ENT.

Setup 2 Page

To select, highlight
with cursor and
press ENT.
The Setup 2 page provides access to display adjust-
ments, parameters which define the nearest airport
search, and COM transceiver channel spacing. When
an item is selected, the corresponding page will appear
providing access to the various unit settings.
To select an item from the Setup 2 page:
1. Press the small right knob momentarily, to
activate the flashing cursor.
2. Turn the large right knob to select the desired
setup item, and press ENT.
190-00356-00 Rev G
9 - AUX PAGES
Setup 2
Fourth Page
in AUX group
175