Duplicate Waypoints - Garmin GNS 400W Pilot's Manual & Reference

Duplicate Waypoints

Once the identifier, facility name or location is
entered, all six airport pages will display informa-
tion for the selected airport. As you enter an iden-
tifier, facility name or location, the 400W-series
Spell'N'Find™ feature will scroll through the database,
displaying those waypoints matching the characters
you have entered to that point. If duplicate entries
exist for the entered facility name or location, addi-
tional entries may be viewed by continuing to turn
the small right knob during the selection process.
If duplicate entries exist for an entered identifier, a
duplicate waypoint page will appear once you select the
identifier (by pressing ENT).
To select a facility name or location, where dupli-
cate entries exist:
1. Select the desired facility name or location.
2. As you spell the facility name or location,
using the small and large right knobs, the
400W-series Spell'N'Find feature will select
the first entry in the database based upon the
characters you have entered up to that point.
Continue turning the small right knob to
3.
scroll through any additional database listings
for the selected facility name or location. You
can scroll backwards with the small right
knob if you scroll past the desired facility name
or location.
4. Press ENT to select the desired facility name
or location.
To remove the flashing cursor, press the small
5.
right knob.
To select a waypoint identifier from a list of
duplicates:
1. Select the desired airport or navaid identifier.
2. A duplicate waypoints window will appear.
Turn the large right knob to select the desired
waypoint and press ENT.
To remove the flashing cursor, press the small
3.
right knob.
190-00356-00 Rev G
6 - WPT PAGES
Duplicate Waypoints
119