Entering An Event Mark - Furuno COLOR SCANNING CSH-23F/24F Operator's Manual

Entering an event mark

1. Set the trackball mark where you want to place an event mark
(latest event mark).
2. Press an EVENT key. The horizontal range, depth and bear-
ing to the event mark appear at the bottom left corner of the
screen.
234: Horizontal range (m) from own ship mark
19: Present depth (m) to mark
(35): Depth (m) of mark at moment EVENT key is pressed.
B265: Present bearing (degree)
Bottom left-hand corner of screen
You observe picture from
direction of
Figure 7-11 Event mark description
Plotting an event mark on the display is equivalent to dropping a
buoy with an anchoring chain that extends from surface to bot-
tom. The buoy is fixed at its present geographical location, but
the marker on the display moves to a point where present beam
plane intersects the anchor chain of the buoy as the ship moves
or the tilt angle is changed. This can be said of other marks as
well such as fish mark and trackball mark.
Erasing an event mark
Open the data setting window (sub panel 2) and select DELETE
MK. Press appropriate EVENT key to erase mark.
B
mark.
A
(35)
Stored when
EVENT key is
pressed.
7-13