Furuno NAVNET GD-1920C Operator's Manual page 220

3
WAYPOINTS/ WAYPOINTS
ROUTES
ROUTES
LOG
Destination is
required.
CREATE
VOYAGE-
BASED
ROUTE
FUNCTION SOFT KEY 1 - SOFT KEY 5
KEY SETUP* (OFF, ADD NEW WPT, MOVE WPT, RULER, GO TO WPT, GO TO
ROUTE, EDIT MK/LINE, TRACK ON/OFF, TTM ON/OFF, DEL TGT TRK,
ALPHA LIST, LOCAL LIST, ROUTE LIST, D. BOX ON/OFF,
CHANGE CNTRL, QUICK POINT)
(Assigns function of each plotter function key.)
* Defaut settings for function keys:
SOFT KEY 1, TRACK ON/OFF; SOFT KEY 2, EDIT MK/LINE;
SOFT KEY 3, RULER; SOFT KEY 4, ADD NEW WPT;
SOFT KEY 5, ALPHA LIST
SYSTEM CONFIGURATION (Same items as on page A-2.)
LOCAL LIST
ALPHANUMERIC LIST
WAYPOINT BY CURSOR
WAYPOINT BY RNG & BRG
GO TO
NEW ROUTE
EDIT ROUTE
ERASE ROUTE
RESTART
STOP/RELEASE
RVRSE/FORWARD
SPEED (Speed for ETA, 0-99 kt, GPS or manual input)
COORD TYPE
NEW (BCKTRK TIME, BCKTRK DIST, MANUAL)
SELECT ROUTE
APPENDIX
GO TO
NEW WPT
EDIT WPT
ERASE WPT
NEW WPT
NEW WPT
START POINT
AP-7