Td Display Setup - Furuno NAVNET GD-1920C Operator's Manual

WAAS SETUP
Press the WAAS SETUP soft key to show the WAAS SETUP display.
Note: This function requires GP-320B antenna.
Item
WAAS MODE Select ON to use the WAAS mode.
WAAS SEARCH WAAS satellite can be searched automatically
or manually. For manual search, enter
appropriate WAAS satellite number.
WAAS ALARM When the WAAS signal is lost, the audible
alarm sounds with the visual message "NO
WAAS SIGNAL."
On: Alarm continues to sound until the WAAS
positioning mode is available again or the alarm
is recognized by key operation.
Off: Alarm sounds three times.
CORRECTION Selects the type of message for WAAS
DATA SET correction. Use "02 (default setting)" until the
system becomes operational.

7.7.3 TD display setup

The TD SETUP menu sets which Loran C or Decca chain to use to display TD position.
(Connection of a Loran C or Decca navigator is not necessary to display TD position.)
1. Press the MENU key.
2. Press the SYSTEM CONFIGURATION, NAV OPTION and TD SETUP soft keys to
display the TD SETUP menu.
Contents of WAAS SETUP menu
Description
LORAN-C
GRI 9940 11-27
U.S. WEST COAST
CORRECTION 1 +000.0 ms
CORRECTION 2 +000.0 ms
DECCA
CHAIN 01 R-G
S BALTIC
CORRECTION 1 +00.00 lane
CORRECTION 2 +00.00 lane
TD setup menu
7. CUSTOMIZING YOUR UNIT
Settings
On, Off
Auto, Manual
On, Off
00 to 27, 99
TD
SETUP
EDIT
RETURN
7-27