Table of Contents
Advertisement
7
Operating
7.1 Starting the device
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce very bright
light. This is also valid immediately after you turn on the device, when the device
operates in automatic mode or under remote control and when you turn off a
DMX controller that is connected to the device. Persons staying near the device
could be injured or frightened.
Before you turn on the device and during the operation, always ensure that
nobody stays close to the device. If work has to be performed in the area of move‐
ment or in the near vicinity of the device, it must remain turned off.
Connect the device to the power supply to start operation. After a few seconds, the fans start
to work, the head moves to the home positions for rotation (pan) and inclination (tilt). After a
few more seconds, the display shows '001' .The device is now ready for operation.
Operating
Hero Wash 340FX RGBW Zoom
moving head
33
Advertisement
Table of Contents
