Menu Tree - Furuno 1715 Operator's Manual

MENU TREE

MENU/ESC
key
Turn on power
MENU/ESC
key
+
POWER/BRILL
key
INSTALLATION
MENU
Choose GO TO RADAR SETUP
from the INSTALLATION menu,
and then go to page 4 of the
SYSTEM menu.
INT REJECTION (OFF, LOW , MEDIUM, HIGH)
ECHO STRETCH ( OFF , LOW, HIGH)
FTC ( OFF , ON)
NOISE REJECTION (OFF, LOW , HIGH)
WATCHMAN TIME ( OFF , 5, 10, 20 min)
HUE ( DAY , NIGHT)
PANEL DIMMER (OFF, LOW, MEDIUM, HIGH )
HDG LINE OFF (Temporarily turns off heading line.)
ECHO TRAIL ( OFF , 30 s; 1, 3, 6 min, CONTIN.)
TRAIL BRILLIANCE ( LOW , HIGH)
TRIPLOG RESET?
LANGUAGE ( ENGLISH , JAPANESE, Others)
SYSTEM MENU
RANGE UNIT ( nm , km, sm)
DEPTH UNIT ( m , ft, fa, HR, pb)
SPEED UNIT ( kt , km/h, mph)
WIND UNIT ( kt , km/h, mph, m/s)
TEMP UNIT (°C, ° F )
NAV DATA (OFF,
KEY BEEP (OFF, ON )
RINGS (OFF, ON )
WAYPOINT MARK (OFF, ON )
EBL REFERENCE (TRUE, RELATIVE )
BEARING READOUT (TRUE, MAGNETIC )
CURSOR POSITION (LAT/LON, RNG&BRG )
TRIP SOURCE ( LAT/LON , SPEED)
WIND SPD/DIR (TRUE, APPARENT )
SHIFT MODE ( MANUAL , AUTO)
AUTO SHIFT SPEED (1-99 (kts), 15 )
TX SECTOR BLANK ( OFF , ON)
BLANKING START (000-359°, 000 °)
BLANKING AREA (000-135°, 000 °)
LOCAL TIME SETUP (-13:30 - +13:30, 0:00 )
ANTENNA SPEED (24rpm, AUTO )
RANGE
nm, sm: 0.125 , 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16, 24
km: 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16, 24, 36
SIMULATION ( OFF , ON, HIGH)
TEST (Tests display unit.)
LCD PATTERN (Displays test pattern.)
MEMORY CLEAR (Restores default menu settings.)
NMEA PORT ( IN/OUT, IN/IN)
NMEA OUTPUT ( OFF , ON)
GPS WAAS ( OFF , WAAS 00-27)
GO TO RADAR SETUP
RADAR SETUP
SCANNER TEST (Tests antenna unit.)
, , )
HEADING ADJUST (Adjusts heading.)
TIMING ADJUST (Adjusts timing.)
SET ON TIME (Displays total hours
radar has been powered.)
SET TX TIME (Displays total hours
of transmission.)
30