Attaching Lan Kit (Option) - Furuno UAIS TRANSPONDER FA-150 Installation Manual

4. ATTACHING LAN KIT (OPTION)

To connect to PC network or NAVNET 3D network, the optional LAN kit is required.
Name: LAN kit
Type: OP24-8
Code no.: 005-956-020
Name
1 NET100 board
2 Hex. spacer
Attaching
1. Dismount the bottom cover.
2. Attach NET100 board 03P9332 to the 24P0035 board, referring to the figure
shown below.
J9
Unfasten 4 screw
SW3
Transponder (Bottom cover removed)
3. Set DIP switch SW3 #4 as follows.
• For NAVNET 3D network: SW3 #4 OFF (default)
• For PC network: SW3 #4 ON
Code no.
008-535-840
000-801-678
24P0035
Qty
1 03P9332
4
Use screws removed in left figure.
03P9332
Spacer
J9
24P0035
Attaching 03P9332
Remark
NET Board03
27