3.4 Setting Ship Type
1. In the INITIAL SETTINGS window, press the ▲ or ▼ key to choose the SET
SHIP TYPE and press the [ENT] key.
2. Press the [ENT] key and set number for ship type by using ▲ or ▼ key,
referring to the table below.
Table: Ship type
No.
1
Future use
2
WIG
3
Vessel
4
HSC
5
Special craft
6
Passenger ships
7
Cargo ships
8
Tanker
9
Other type of ship
(For details, see "§1.5 Setting Up for Voyage" on the operator's manual.)
3. Press the [MENU] key to save the setting.
3.5 Setting I/O Port
Setting COM port/PC port
1. In the INITIAL SETTINGS window, press ▲ or ▼ key to choose the SET I/O
PORT and press the [ENT] key.
2. SET COM PORT is selected; press the [ENT] key.
22
[SET SHIP TYPE]
TYPE NO :
* * * * TYPE DETAIL * * * *
NOT AVAILABLE
Ship type
[SET I/O PORT]
SET COM PORT
COM1COM1
SET PC PORT
1
SET LAN PORT*
SET PRIORITY
2
SET QUALITY*
QUIT[MENU]
1
*
Shown if fitted with LAN kit (option).
2
*
Shown if Inland AIS is incorporated.
SET I/O PORT menu
0
*
WIG: Wing in ground
HSC: High speed craft