Selecting Ais Mode - Furuno UAIS TRANSPONDER FA-150 Installation Manual

Selecting AIS mode

The Inland AIS has two operating modes: Inland (inland waterways) and SOLAS
(SOLAS compliant class A AIS transponder). Select INLAND AIS mode as follows:
1. Press the [NAV STATUS] key to open the NAV STATUS menu.
2. Push ▼ to select AIS MODE then press the [ENT] key.
3. Select INLAND (Inland AIS) then press the [ENT] key.
You are asked if you are sure to reboot the system. Press◄ to select YES then
press the [ENT] key to reboot.
Setting blue sign status
Blue sign (a day-sign), which in combination with a white flashing light, must be
shown if you are sailing on the port-side shore (against traffic direction).
1. Press the [MENU] key to open the menu.
2. Press ▼ on the cursor pad to select INITIAL SETTINGS and press the [ENT]
key. The password entry window appears.
18
[NAV STATUS]
NAV STATUS:
AID MODE:
***STATUS DETAIL***
NOT DEFINED
(DEFAULT)
NAV STATUS menu (initial sub-menu)
SOLASRX
INLAND
[MENU]
MSG
SENSOR STATUS
INTERNAL GPS
USER SETTINGS
INITIAL SETTINGS
CHANNEL SETTINGS
DIAGNOSTICS
Main menu
[ENTER PASSWORD]
Password entry window
15
SOLAS