Nortel M5208 Manual page 22

Procedure 4-1
How to install the M5208 (continued)
Step
Action
5 Turn the telephone right side up and place it into its final
position.
6 Remove the number lens by inserting a paper clip end into
the hole at the side and pop off the plastic lens. Print the
directory number on the designation card and insert it into the
lens recess. Snap the plastic lens back into place.
7 Designate button labels for key designations.
8 Fold the labels, insert them into the plastic button covers, and
snap each button cover over the appropriate feature/line key.
Press down on each key until the button cover fits in place.
9 Insert the other end of the line cord into the wall jack and
make sure it has been securely snapped into place.
10 Wait a minimum of 20 seconds to allow for proper power-up
before using the Meridian Business Set. This completes the
installation. If the set must be prepared for mounting on a
wall, follow Procedure 4-2.
—end—
297–2011–213 02.01 Standard February 1999
Installation 4-3