Nortel M5208 Manual page 29

5-4 Verification procedures
Procedure 5-2
How to perform the Station Ringer test
Step Action or key/switch operated
Handset ON-hook. Press PDN
1
key and dial STR (access code)
using on-hook dialing.
Note: All LCD indicators should be off before you start the test. access code.
The 3-14 digit access code consists of a one to seven digit number (which is
assigned by the telephone company according to local preferences) followed by
the last two to seven digits of the PDN assigned to the telephone to be tested.
In North America, the access code usually consists of the number 57, followed
by the last five digits of the PDN. If the required digits are dialed incorrectly, a
Reorder tone sounds which makes it necessary to press the Release key and
start again. If all digits are correct, all LCD indicators on the set light up.
Handset OFF-HOOK
2
Handset ON-HOOK
3
4 Handset OFF-HOOK
5 Handset ON-HOOK
Dial Pad key 1
6
Dial Pad key 2
7
Dial Pad key 3
8
9 Dial Pad key 4
10 Dial Pad key 5
Dial Pad key 6
11
Dial Pad key 7
12
Dial Pad key 8
13
Dial Pad key 9
14
15 Dial Pad key 0
Dial Pad key •
16
Dial Pad key £
17
Feature key 1
18
Feature key 2
19
20 Feature key 3
297–2011–213 02.01 Standard February 1999
Response
All LCD's ON
All LCDs FLASH
All LCDs WINK
All LCDs ON
All LCDs OFF
LCD 1 ON
LCD 2 ON
LCD 3 ON
LCD 4 ON
LCD 5 ON
LCD 6 ON
LCD 7 ON
LCD 8 ON
LCD 1 & 8 ON
LCD 2 & 8 ON
All LCDs ON
All LCDs 1 OFF
LCD 1 ON
LCD 2 ON
LCD 3 ON
—continued—
Messages
LCD indicator ON
LCD indicator FLASH
LCD indicator WINK
LCD indicator ON
LCD indicator OFF
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON
Soft Reset, LCD ON